363 x 363mm, for metallic roof
This is an EDPM flashing and is suitable for almost all non-tiled roofs (felt, glass fibre, rubber, EDPM, zinc, etc.) and will even work with corrugated roofs. Metal roofing screws (or wood screws into wood) are used. Screws are not supplied in our kit.
The multi-application flashing in a highly durable EPDM, edged with a flexible aluminium band, flashes hot or cold flues and pipes on metal roofs. The square base fits any prepared hole on most roof profiles.
PLEASE NOTE THE DIAMETER OF THE FLASHING ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE
Additional Information
| Name | EPDM flashing 0° - 45° |
|---|---|
| Reference number | EPDM DFE106B |
| Inside pipe | AISI 316L (1.4404) |
| Outside pipe | AISI 304 (1.4301) |
| Overlap (cm) | 60mm |
| Thickness inside pipe (mm) | 0.4 |
| Thickness outside pipe (mm) | 0.4 |
| Type of fuel | Wood & multifuel |
| Distance to flammables (cm) | 70mm when in an enclosure and 50mm when not enclosed |
| Temperature of use | 200ºC continuous |
| Delivery time (working days) | 1-3 |
| Transport cost (total order) | From £8.99, Free delivery over £120. |
| (Compatible with) internal pipe diameter (mm) | 125 |
Cheaper elsewhere?
We will go another 5% below!
9.5/10
Based on 72 customer review
A customer wrote:
I was a little concerned that this product was half the price of any other...
Customer service
0800 279 02 74Tel. —> 1.30 pm - 5 pm Mo - Sa Chat —> 1.30 pm - 7 pm Mo - Sa Email —> Mo - Mo
