Details
456 x 456 mm, for metallic roof
This is an EDPM flashing and is suitable for almost all non-tiled roofs (felt, glass fibre, rubber, EDPM, zinc, etc.) and will even work with corrugated roofs. Metal roofing screws (or wood screws into wood) are used. Screws are not supplied in our kit.
PLEASE NOTE THE DIAMETER OF THE FLASHING ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE
Additional Information
| Name | EPDM flashing 0° - 45° |
|---|---|
| Reference number | EPDM DFE107B |
| Inside pipe | AISI 316L (1.4404) |
| Outside pipe | AISI 304 (1.4301) |
| Overlap (cm) | 6 cm |
| Thickness inside pipe (mm) | 0.4 |
| Thickness outside pipe (mm) | 0.4 |
| Type of fuel | Wood & multifuel |
| Thickness insulation (mm) | 30 mm |
| Distance to flammables (cm) | 7 cm when in an enclosure and 5 cm when not enclosed |
| Temperature of use | 600ºC continuous, 1000ºC peak. |
| Delivery time (working days) | 1-3 |
| Transport cost (total order) | 1 to 3 products: delivery costs £20.00; 4 products or more £29.99 (UK & Scottish Mainland) Free delivery > £200 GBP (UK & Scottish Mainland) |
| (Compatible with) internal pipe diameter (mm) | 175 |
My Cart
Free flue
design service
design service
Enter your measurements and we will make a personalized offer within 24 hours.
Let us design your flue
Line your chimney
Determine the correct flue liner kit in only 10 minutes.
Start now
Build a new flue
Design your own flue in only 15 minutes.
Start now
