456 x 456 mm, for metallic roof
This is an EDPM flashing and is suitable for almost all non-tiled roofs (felt, glass fibre, rubber, EDPM, zinc, etc.) and will even work with corrugated roofs. Metal roofing screws (or wood screws into wood) are used. Screws are not supplied in our kit.
PLEASE NOTE THE DIAMETER OF THE FLASHING ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE
Additional Information
| Name | EPDM flashing 0° - 45° |
|---|---|
| Reference number | EPDM DFE107G |
| Inside pipe | AISI 316L (1.4404) |
| Outside pipe | AISI 304 (1.4301) |
| Overlap (cm) | 6mm |
| Thickness inside pipe (mm) | 0.4 |
| Thickness outside pipe (mm) | 0.4 |
| Type of fuel | Wood & multifuel |
| Thickness insulation (mm) | 30mm |
| Distance to flammables (cm) | 70mm when in an enclosure and 50mm when not enclosed |
| Temperature of use | 600ºC continuous, 1000ºC peak. |
| Delivery time (working days) | 1-3 |
| Transport cost (total order) | From £8.99, Free delivery over £120. |
My Cart
Cheaper elsewhere?
We will go another 5% below!
9.5/10
Based on 72 customer review
A customer wrote:
Super service, quick delivery.
Customer service
0800 279 02 74Tel. —> 1.30 pm - 5 pm Mo - Sa Chat —> 1.30 pm - 7 pm Mo - Sa Email —> Mo - Mo
