Telescopic wall sleeve
Adjustable wall sleeve
Save hours of labor by installing the sleeve with finishing plate. No more need for redecoration and plastering!
The use of a 45 º ADJUSTABLE WALL SLEEVE is recommended to protect both the flue pipe and the fabric of the wall when passing Twin Wall through an external wall. You must maintain the clearance between the flue and the wall sleeve to allow for thermal expansion but can seal either end with Stove Rope if necessary.
Please note, this Sleeve is angled at 45 degrees and not horizontal; and is only available in stainless.
The sleeve can be adapted to the thickness of the wall. The twin wall flue pipe goes through the sleeve.
|Name||Telescopic wall sleeve|
|Inside pipe||AISI 316L (1.4404)|
|Outside pipe||AISI 304 (1.4301)|
|Overlap (cm)||6 cm|
|Thickness inside pipe (mm)||0.4|
|Thickness outside pipe (mm)||0.4|
|Type of fuel||Wood & solid fuels|
|Thickness insulation (mm)||30 mm|
|Distance to flammables (cm)||6 cm|
|CE Classification EN 1856-1||T600 N1 D V2 L50040 G60|
|Temperature of use||600ºC continuous, 1000ºC peak.|
|Delivery time (working days)||1-3|
|Transport cost (total order)||From £8.99, Free delivery over £120.|
|(Compatible with) internal pipe diameter (mm)||130 mm = 5'|
What other people are saying about us:
"Loved the support"
"Very rapid delivery and well packed. All items in excellent condition. Thanks dad for the installation!"
Carolyn Mckinnon - Bath
"Easy job of just a few hours..."
H. T. Edwards - Birmingham