Tech support: 888-834-0880           contact@flue-pipes.com           (9am - 9pm)   7/7  

×

Stainless Steel Chimney Liners and Liner Kits: 316Ti, Made in USA

$558.00

Taxes calculated at checkout. Free transport

  • Limited Lifetime Warranty and UL listed!

Selected products

How to Connect the Liner Installing a Chimney Liner

Liner Installation Videos  Relining Regulations

The stainless steel chimney liner in these kits is a flexible 316Ti tube, UL listed, that lines a masonry chimney from the inside. Often called a flue liner, it gives the smoke a sealed, correctly sized path from your stove to the top of the chimney.

Our Chimney Liner Kits

Choose a complete flue liner kit for your chimney flue, in the size your stove’s flue outlet calls for. Each kit holds the liner components your chimney needs.

Our liners do not come pre-insulated: add the insulation your fuel type and your chimney call for.

What you needSizesWhere to get it
Complete chimney liner kit 4, 5, 5.5, 6, 7 and 8 inch The kit builder at the top of this page
Insulation for your liner 4, 5, 5.5, 6, 7 and 8 inch The question Add insulation to your liner? in the kit builder. On its own: 4 inch, 5 inch and 5.5 inch in 25 ft; 6 inch in 25, 30 or 35 ft

 

What Types of Chimney Liner Are There?

The main types are flexible stainless steel, rigid stainless steel, clay tile and cast-in-place. For a wood stove reline, the practical choice is flexible stainless steel, and it is what we sell.

Flexible stainless is a corrugated tube that bends down an existing masonry chimney, including one with offsets. Rigid stainless does not bend, so it suits a straight flue. Clay tile is the original lining in most older masonry chimneys, and it cracks with age and heat cycling. Cast-in-place is a poured cement lining, a specialist repair we do not supply.

Our types of chimney liners guide compares them side by side.

Not sure? Call 888-834-0880, or use our free flue design service.

What is in a Chimney Liner Kit?

A complete flexible chimney liner kit gives you everything needed to install a stainless steel liner from your stove to the top of your chimney. Instead of sourcing parts separately and risking compatibility issues, our kits come pre-matched with components designed to work together. Each kit is built for wood stoves.

ComponentFunction
Flexible Chimney liner 316Ti grade stainless steel, runs through the masonry chimney
Top plate Seals the top of the chimney around the liner
Rain cap Keeps rain, animals, and debris out of the flue
Stove-to-liner adapter (appliance connector) Connects the liner in a straight vertical run to the stove or rigid stove pipe. Used only when there are no 90-degree bends in the path.
A tee and tee cap Used whenever the connection enters the chimney from the side or through a 90-degree turn. The tee sits inside the chimney, the liner runs up from it, and the snout connects to the stove.

 

Why Choose Our Chimney Liner Kits

  • You don't need to know chimney liner brands. Answer 4 questions -- diameter, length, connection type, insulation -- and the wizard builds the right kit for your chimney. No brand research, no guessing which parts go together.
  • 316Ti grade stainless steel: the same premium alloy used by the leading US chimney liner manufacturers. UL listed, Limited Lifetime Warranty.
  • Free flue design service: not sure which size you need? Send us your stove model and chimney measurements and we will recommend the right kit at no charge.
  • Lowest price guarantee: find the same kit cheaper elsewhere and we will beat it by 5%.
  • Made in USA: manufactured and shipped from US warehouses. Free shipping on every order.
  • 14-day return policy: if the kit does not fit your needs, send it back.

How We Compare

 Flue PipesBig-Box StoresMulti-Brand Retailers
Kit configurator Yes -- 4 questions, instant price No -- fixed SKUs only Limited or none
Free design service Yes No No
In-store pickup Ships from US warehouse Not in stock in stores Online only
Brands to choose from One matched system -- no confusion 1-2 brands 8+ brands -- you figure it out
Price guarantee Yes -- beat by 5% Price match only No
Warranty Limited lifetime Limited lifetime Varies by brand

 

Choosing the Right Kit Size

Match the liner diameter to your stove flue collar. Most wood stoves use a 6 inch outlet. Our kits come in 4, 5, 5.5, 6, 7 and 8 inch; never choose a liner smaller than your stove's outlet.

An open fireplace needs a liner with a cross-section of at least 1/12 of the fireplace opening, so most open fireplaces need a 10 to 12 inch liner. A 7 inch liner (38 sq in) only fits an opening up to about 460 sq in, an 8 inch liner (50 sq in) one up to about 600 sq in. Measure the width and height of your fireplace opening before you choose. Read more in our guide to chimney liners for an open fireplace.

For length, measure the chimney height from the stove location to the top of the chimney, then add a few extra feet for the top plate connection and any bends. Our kits come in 20, 25, 30 and 35 ft lengths, depending on the diameter and the connection, with custom lengths available on request.

Stove typeRecommended diameter
Smaller stove with a 4, 5 or 5.5 inch outlet The same size as the outlet
Standard wood stove 6 inch

Not sure which size to choose? Our team can help you measure correctly. Contact us for a free design service.

Insulated or non-insulated kit?

Insulate when the chimney is oversized, runs up an outside wall, or serves a stove you run hard all winter. An old chimney built for an open fireplace is far larger than a modern stove needs, so the flue gas spreads out and cools on the way up. Cool gas means a weak draft, more creosote and condensation soaking into the masonry. The wrap keeps the gas hot, which keeps the draft steady and the flue dry.

In a sound interior masonry chimney of roughly the right size, a wood or coal stove can go without insulation only when there is already enough air gap between the masonry and the wooden framing around it, which you often cannot see from inside the room, so check with a professional if you are unsure. For gas or oil in a sound chimney, a non-insulated kit is usually fine and costs less upfront.

For a deeper comparison and material info, see our chimney liner insulation guide.

Is a Stainless Steel Chimney Liner Right for Your Chimney?

A stainless liner is right for a masonry chimney that an inspection has found fit to reline for your stove. Without a masonry chimney, a new Class A chimney is the answer instead.

Are Stainless Steel Chimney Liners Good?

Yes, when the liner is listed, sized to your stove's flue outlet and installed as its instructions say. The flexible liner in our kits is 316Ti stainless steel and UL listed, and our warranty page rates our flexible liners for continuous use up to 1000°F (538°C).

Every liner kit carries our Limited Lifetime Warranty. For the first 15 years from the date of purchase, Chimney & Stove Co. LLC will replace defective components at 100% of the original purchase price. After this period, replacements are offered at 50% of the original price.

Installation must follow the installation instructions supplied with the product, whether the work is carried out by the owner or by a contractor; the other conditions are on our warranty page.

Why Do Our Kits Use Flexible Liner?

Our kits use flexible liner because it bends past the ledges and offsets inside a masonry flue on its way down. The pulling cone offered in the kit builder above helps it go down without catching, most of all when the liner is insulated. Whether to insulate depends mostly on your fuel type, and the kit builder explains it beside the question.

Rather than a pre-insulated liner, the kit builder adds an insulation wrap the length of your liner. The wrap adds about 1 inch to the diameter, so measure the inside of your flue first: a 6 inch liner with its wrap needs roughly 7 inches of clear space.

Once it is down, the liner gives the smoke a sealed, correctly sized passage through the chimney flue. Each kit comes with its liner components chosen to fit together, listed in the table under What is in a Chimney Liner Kit?, so you do not have to match parts yourself.

What Comes Before a Reline?

Book a Level 2 inspection first: our guide to chimney inspection names it for a change of fuel type or appliance. A certified chimney sweep or inspector can carry it out, and that guide shows how to find one. Whether your chimney needs a liner at all is answered under Do I really need a chimney liner? below.

For the code side, read our answer to are chimney liners required by code. Your local building department confirms which codes apply where you live.

When Is Class A Chimney Pipe the Better Choice?

Class A chimney pipe is the better choice when there is no masonry chimney to line, or when the inspection rules the old one out.

A new chimney is then built from UL 103 HT chimney pipe, our insulated Class A pipe. If the stove vents straight up under an open, vaulted or cathedral ceiling, our kit takes the chimney pipe through roof and ceiling as one matched system; for a route out through a wall, up through an attic or through a two-story house, our wood stove chimney kits page sorts the kits by route.

Our guide to chimney liner vs Class A chimney pipe sets out when each one is the answer. Not sure which route fits your house? Send us your measurements through a free flue design request, or call us on 888-834-0880.

DIY Installation Overview

Our flexible liner kits are designed for DIY installation by reasonably handy homeowners. The general steps are:

  1. Measure your chimney height and stove flue collar diameter
  2. Order the kit in the matching size and length
  3. Feed the flexible liner from the top of the chimney downward
  4. Connect the stove-to-liner adapter at the bottom
  5. Secure the top plate and install the rain cap on top
  6. Seal all joints with the supplied high-temperature sealant
  7. Test draft with a small fire and inspect for leaks

For full step-by-step instructions with photos, sizing details, and code references, read our Chimney Liner Installation Guide. Always follow local building codes and check whether a permit is required in your area.

Chimney Liner Resources

Everything you need to know about chimney relining -- from sizing and installation to building codes and insulation. Each guide is written for DIY homeowners installing a stainless steel chimney liner kit.

Installation

Insulation

Do I Need a Chimney Liner?

 

Frequently Asked Questions

What is included in a Flue-Pipes chimney liner kit?

Each kit includes a flexible 316Ti grade stainless steel liner, top plate, rain cap, an appliance connector or a tee, depending on your setup. Insulation wrap can be added for high-efficiency installations.

How do I know which size and length kit I need?

Match the liner diameter to your stove flue collar. Most wood stoves use 6 inch; our kits come in 4, 5, 5.5, 6, 7 and 8 inch. For length, measure your chimney height from stove location to the top and add 2 to 3 feet for connections. Our team can verify your sizing for free if you share your measurements.

Can I install a flexible chimney liner kit myself?

Yes. Our flexible liner kits are lightweight and DIY-friendly with detailed instructions. Most homeowners can install in a few hours with basic tools. Always check your local building codes and obtain a permit if required. See our step-by-step installation guide.

Why do you use 316Ti stainless steel instead of 304?

316Ti offers higher corrosion resistance than standard 304 stainless steel, especially against acidic combustion byproducts and coastal environments. For wood stoves, 316Ti is a premium choice that extends the lifespan of your liner and provides extra peace of mind.

Do you sell custom-length chimney liner kits?

Yes. Beyond our standard 20, 25, 30 and 35 foot lengths, we can custom-cut kits to your exact chimney height. Contact our team with your measurements and we will quote a custom kit for you.

How long does a 316Ti stainless steel chimney liner kit last?

With proper installation and annual chimney sweeping, our 316Ti grade stainless steel liners typically last 25 years or more. The flex liner comes with a limited lifetime warranty.

How much does a chimney liner kit cost?

A kit's price depends on its diameter, its length, the connection at the bottom and whether you add insulation. Choose those in the kit builder at the top of this page and it shows the price of your kit, with free shipping. Professional installation on top of the kit usually takes half a day to a full day of labor; our chimney installation cost guide sets out labor ranges with their sources.

Can you put a liner in an old chimney?

That is exactly what a flexible liner is designed for. A stainless steel liner slides down inside the existing masonry flue and seals at the top and bottom, giving an old chimney a new, gas-tight interior without rebuilding it. It works whether the original clay tiles are cracked, missing, or simply too large for a modern stove. See our insulation guide for when to add a wrap in older chimneys.

Do I really need a chimney liner?

If your masonry chimney has cracked or missing clay tiles, or if you are connecting a new stove to an older chimney, a liner is the standard way to make it safe and code-compliant. A liner contains combustion gases, prevents creosote from reaching the masonry, and protects nearby woodwork from heat transfer. Read more about why a chimney liner is required by building codes.

What is the 3-2-10 rule for chimneys?

The 3-2-10 rule (NFPA 211, as the Class A installation instructions quote it) requires that a chimney extend at least 3 feet above the highest point where it passes through the roof, and at least 2 feet higher than any portion of a building within 10 feet. For a factory-built Class A chimney, IRC Section R1005.1 makes the installation instructions the rule; R1003.9 sets the same heights for masonry chimneys. See our chimney height requirements guide for details.