Details
363 x 363mm, for metallic roof.
The fixing kit Includes:
- 1 x 75ml tube of low modulus Silicone
- 25 x self-drilling screws
- 25 x colour caps (silver)
- Fixing instruction leaflet.
The multi-application flashing in a highly durable EPDM, edged with a flexible aluminium band, flashes hot or cold flues and pipes on metal roofs. The square base fits any prepared hole on most roof profiles.
Has a maximum temperature of 115°C. This means it can be used on any flue where the distance to the stove is more than 4mtr.
PLEASE NOTE THE DIAMETER OF THE FLASHING ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE
Additional Information
| Name | Roof Flashing Rubber 0 - 45° (for flues higher than 4m; non-tiled roofs) |
|---|---|
| Reference number | DADC-6+DAFK-S. |
| Inside pipe | AISI 316L (1.4404) |
| Outside pipe | AISI 304 (1.4301) |
| Overlap (cm) | 60mm |
| Thickness inside pipe (mm) | 0.4 |
| Thickness outside pipe (mm) | 0.4 |
| Type of fuel | Wood & multifuel |
| Distance to flammables (cm) | 70mm when in an enclosure and 50mm when not enclosed |
| Temperature of use | 200ºC continuous |
| Delivery time (working days) | 1-3 |
| Transport cost (total order) | 1 to 3 products: delivery costs £20.00; 4 products or more £29.99 (UK & Scottish Mainland) Free delivery > £200 GBP (UK & Scottish Mainland) |
| (Compatible with) internal pipe diameter (mm) | 125 |
Free flue
design service
design service
Enter your measurements and we will make a personalized offer within 24 hours.
Let us design your flue
Line your chimney
Determine the correct flue liner kit in only 10 minutes.
Start now
Build a new Twin Wall Flue
Design your own flue in only 15 minutes.
Start now
