Home /
Flexible flue liner 904 - per meter (Lifetime warranty)

Flexible flue liner 904 - per meter (Lifetime warranty)

More Views

Flexible flue liner 904 - per meter (Lifetime warranty)

£49.00

Prices are Incl. Tax Excl. Shipping

Qty:

« Go Back

14 Days Guaranteed Return
14 day cooling off period whereby your goods can be sent back to us

Warranty: From 10 years to a lifetime
Our no quibble promise to you

Details

Premium Class 1 Stainless Steel 904 (inside and outside) Flexible Chimney Liner, to be used when re-lining a masonry chimney . Price is per meter, but it will be supplied as a continuous length.

Suitable for burning the following fuels: Seasoned Dried Wood, Gas, Oil, Coke, Peat, and Smokeless fuels.
Especially recommended for burning coal
This liner comes with a lifetime guarantee* (conditions apply).
Normal operating temperature of up to 450°C for solid fuel and 250°C for Oil and Gas.
HETAS approved product
Manufactured in the UK
Corrosion and crush resistant

Please note: The liner should not be fitted directly to the appliance. A short length of either vitreous or 316 stainless steel (preferably with a clean-out door for sweeping) should be fitted from the appliance to the liner adaptor.

Additional Information

Name	Flexible flue liner 904 - per meter (Lifetime warranty)
Reference number	FS10206
Inside pipe	AISI 316L (1.4404)
Type of fuel	Seasoned Dried Wood, Gas, Oil, Coke, Peat and Smokeless fuels.
Wall thickness (mm)	0,12mm
Temperature of use	600ºC continuous, 1000ºC peak.
Delivery time (working days)	1-2
Transport cost (total order)	1 to 3 products: delivery costs £20.00; 4 products or more £29.99 (UK & Scottish Mainland) Free delivery > £200 GBP (UK & Scottish Mainland)
(Compatible with) internal pipe diameter (mm)	150

Flexible Chimney Liner Premium Class 1 Stainless Steel 904

to be used when re-lining a masonry chimney only - EN 1856-2 T600 N1 D V2 L70010 G. This flexible lining is suitable for:

Seasoned/Kiln/Dried wood
HETAS approved Solid Fuels
HETAS approved Smokeless Fuels
Gas appliances
Oil Fired appliances

The flue liner is made from 2 separate sheets of stainless steel:

The Outer: The outer skin is a pre-profiled ribbon of stainless steel, with deep, close together waves that create an extremely hard and protective exterior for the flue, like a shell. When your chimney liner is dragged down a brick flue it will undoubtedly be pulled and hit against the brick work. The outer/shell is a separate sheet (and not 1 or 2 pieces folded together) that protects the smooth inner from damage. It also makes it less likely that the flue in general will be damaged or compromised before installation compared to other flues that are soft and can be damaged as easily as being knocked in the back of a van.

The Inner: The Inner skin of our flue liner is a pre profiled ribbon of stainless steel, which has been made with a fine special oil spray to create a smooth inner surface. Unlike other flues our inner surface of steel has not been folded or scratched in production and has not been compromised in any way. It is locked to the outer skin purely with pressure using a patented technique. This means that this chimney liner essentially has a fresh un compromised inner surface for the flue gasses to pass through making it almost impossible for corrosion to set in.

There are no internal flaps, folds or lips on the inside which makes it the only chimney liner on the UK market to have this unique feature. Traditional flue liners with multi directional arrows and flaps/folds inside damage easily, can come apart on installation and could splay or come apart internally once fitted, which you will not normally see unless your installer or chimney sweep does a camera inspection for you.

The product will come wrapped in shrink wrap clearly marked 904.

• Lifetime Warranty (No quibble)
• Can be fitted with the arrow pointed upwards
• No folds or flaps on the inside
• Extremely tough and strong
• Smooth inner
• Protective outer
• Flexible and Durable
• Premium flue and quality assured

My Cart