Details
363 x 363mm, for metallic roof
This is an rubber flashing and is suitable for almost all non-tiled roofs (felt, glass fibre, rubber, EDPM, zinc, etc.) and will even work with corrugated roofs. Metal roofing screws are used. Screws are included in the fixing kit.
Kit Includes:
- 1 x 75ml tube of low modulus Silicone
- 25 x self-drilling screws
- 25 x colour caps (silver)
- Fixing instruction leaflet.
The multi-application flashing in a highly durable EPDM rubber, edged with a flexible aluminium band, flashes hot or cold flues and pipes on metal roofs. The square base fits any prepared hole on most roof profiles.
Has a maximum temperature of 240°C. This means it can be used on any flue where the distance flashing-to-stove is less than 4mtr.
PLEASE NOTE THE DIAMETER OF THE FLASHING ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE
Additional Information
Name | Roof Flashing Rubber 0° - 45° (for flues lower than 4m; non-tiled roofs) |
---|---|
Reference number | DADH-6+DAFK-S |
Inside pipe | AISI 316L (1.4404) |
Outside pipe | AISI 304 (1.4301) |
Overlap (cm) | 60mm |
Thickness inside pipe (mm) | 0.4 |
Thickness outside pipe (mm) | 0.4 |
Type of fuel | Wood & multifuel |
Temperature of use | 200ºC continuous |
Delivery time (working days) | 1-3 |
Transport cost (total order) | 1 to 3 products: delivery costs £20.00; 4 products or more £29.99 (UK & Scottish Mainland) Free delivery > £200 GBP (UK & Scottish Mainland) |
(Compatible with) internal pipe diameter (mm) | 125 |