Details
363 x 363mm, for metallic roof
This is an rubber flashing and is suitable for almost all non-tiled roofs (felt, glass fibre, rubber, EDPM, zinc, etc.) and will even work with corrugated roofs. Metal roofing screws are used. Screws are included in the fixing kit.
Kit Includes:
- 1 x 75ml tube of low modulus Silicone
- 25 x self-drilling screws
- 25 x colour caps (silver)
- Fixing instruction leaflet.
The multi-application flashing in a highly durable EPDM rubber, edged with a flexible aluminium band, flashes hot or cold flues and pipes on metal roofs. The square base fits any prepared hole on most roof profiles.
Has a maximum temperature of 240°C. This means it can be used on any flue where the distance flashing-to-stove is less than 4mtr.
PLEASE NOTE THE DIAMETER OF THE FLASHING ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE
Additional Information
| Name | Roof Flashing Rubber 0° - 45° (for flues lower than 4m; non-tiled roofs) |
|---|---|
| Reference number | DADH-8+DAFK-S |
| Inside pipe | AISI 316L (1.4404) |
| Outside pipe | AISI 304 (1.4301) |
| Overlap (cm) | 60mm |
| Thickness inside pipe (mm) | 0.4 |
| Thickness outside pipe (mm) | 0.4 |
| Type of fuel | Wood & multifuel |
| Temperature of use | 200ºC continuous |
| Delivery time (working days) | 1-3 |
| Transport cost (total order) | 1 to 3 products: delivery costs £20.00; 4 products or more £29.99 (UK & Scottish Mainland) Free delivery > £200 GBP (UK & Scottish Mainland) |
| (Compatible with) internal pipe diameter (mm) | 200 |
design service
Enter your measurements and we will make a personalized offer within 24 hours.
Let us design your flue
Determine the correct flue liner kit in only 10 minutes.
Start now
Design your own flue in only 15 minutes.
Start now
