Details
Aluminium square measures 600mm x 600mm (ideal for flatter tiles such as slate but not so good for less flat tiles as the aluminium does not "mould" to surfaces so well). A Storm collar is not required with these flashings but can be used to hide the rubber.
For flues lower than 4mtr. The temperature of a flue at 4m above the stove is still quite high. Therefor a high Temperature resistant flashing is required.
Extension: 110mm x 200mm
Installation Guide
You will see the rubber upstand has various cut lines indicated on the outside. Simply cut to required size using a stanley knife. This product is used to weather-proof the roof around the flue. Once the system is in place, lift the tiles around the area and place flashing onto the roof. Secure if required using self-tapping screws (not supplied). Place roof tiles back into position making sure you leave the bottom edge of the flashing above the tiles so the rain will run onto the lower tiles and disperse.
Additional Information
| Name | Rubber Aluminium flashing 0° - 45° (for flues up to 4m; for flatter tiles) |
|---|---|
| Reference number | DVAH-4. |
| Inside pipe | AISI 316L (1.4404) |
| Outside pipe | AISI 304 (1.4301) |
| Overlap (cm) | 6 cm |
| Thickness inside pipe (mm) | 0.4 |
| Thickness outside pipe (mm) | 0.4 |
| Type of fuel | Wood & multifuel |
| Thickness insulation (mm) | 30 mm |
| Distance to flammables (cm) | 7 cm when in an enclosure and 5 cm when not enclosed |
| Temperature of use | 600ºC continuous, 1000ºC peak. |
| Delivery time (working days) | 1-3 |
| Transport cost (total order) | 1 to 3 products: delivery costs £20.00; 4 products or more £29.99 (UK & Scottish Mainland) Free delivery > £200 GBP (UK & Scottish Mainland) |
| (Compatible with) internal pipe diameter (mm) | 125 |
design service
Enter your measurements and we will make a personalized offer within 24 hours.
Let us design your flue
Determine the correct flue liner kit in only 10 minutes.
Start now
Design your own flue in only 15 minutes.
Start now
