Aluminium square measures 600mm x 600mm (ideal for flatter tiles such as slate but not so good for less flat tiles as the aluminium does not "mould" to surfaces so well). A Storm collar is not required with these flashings but can be used to hide the rubber.
Extension: 110mm x 200mm
You will see the rubber upstand has various cut lines indicated on the outside. Simply cut to required size using a stanley knife. This product is used to weather-proof the roof around the flue. Once the system is in place, lift the tiles around the area and place flashing onto the roof. Secure if required using self-tapping screws (not supplied). Place roof tiles back into position making sure you leave the bottom edge of the flashing above the tiles so the rain will run onto the lower tiles and disperse.
|Name||Rubber Aluminium flashing 0° - 45° (for flues higher than 4m; for flatter tiles)|
|Inside pipe||AISI 316L (1.4404)|
|Outside pipe||AISI 304 (1.4301)|
|Overlap (cm)||6 cm|
|Thickness inside pipe (mm)||0.4|
|Thickness outside pipe (mm)||0.4|
|Type of fuel||Wood & multifuel|
|Thickness insulation (mm)||30 mm|
|Distance to flammables (cm)||7 cm when in an enclosure and 5 cm when not enclosed|
|Temperature of use||600ºC continuous, 1000ºC peak.|
|Delivery time (working days)||1-3|
|Transport cost (total order)||1 to 3 products: delivery costs £20.00; 4 products or more £29.99 (UK & Scottish Mainland) Free delivery > £200 GBP (UK & Scottish Mainland)|
|(Compatible with) internal pipe diameter (mm)||150|