Vented Floor support

Floor Support to be placed on the floor where flue comes through a combustible ceiling.

Heavy Duty Galvanised Steel

316 Stainless Steel Bracket 

Powder Coated Matt Black Finish

Passage of a flue through the floor

The passage through the floor can be done with:

- a Ventilated Firestop plate against the ceiling (in practice customers often take a round trim plate); and
- a Vented Floor support on the floor. 

1. Put a length through a pre-prepared wood box in the floor and slide down the Vented Floor support plate.

2. Screw this Floor support plate to the box. Next, screw the support clamp directly to the jacket pipe of the length. 

3 Glue the Ventilated Fire Stop plate (or round trim plate) onto the ceiling 

Safety distances

The minimum distance between the insulated chimney's outer wall and the combustible materials is 60mm (G60).

The minimum distance between the single wall stove pipes and the wooden floor is 3 times the diameter (of the pipe) and never less than 375mm. For 5" pipes (125mm) this means always minimum 375mm. For 6" pipes (150mm) it is 450mm.

If the flue passes through a first floor, it must be boxed in.